delete

Advantages of Utilizing Concrete Pumps for Residential Projects 

Most individuals are used to witnessing concrete pump trucks on big commercial jobs. The additional expenses related to line pumps and boom pumps are figured into the bid totals proposed by the concrete companies. The truth is that placing concrete will be mostly not possible without the use of concrete pumping gears. This is especially true with huge buildings. 

Concrete Pumps

You may not see a pump truck utilized a lot in residential projects. Budgets for construction assign less cash for associated expenses to placement of sidewalks, slabs, and driveways. Almost all residential concrete companies feel the mixer truck could go anywhere to apply concrete. 

This is true, normally. But, concrete isn’t always applied under several situations such as packed, hard, and dry soil. 

There are several great reasons to utilize a line pump or boom pump to apply cement in a residential project. 

Faster Placement 

You don’t have to keep moving the concrete trucks around the footing’s or slab’s edge. An operator of the pump truck with a unit handled by a remote control could move the boom everywhere to apply the cement as required.  

Ease of Placement 

Wheelbarrows are not required. You will not have to use a rake to drag the cement six up to seven feet from the point of discharge of the truck chute.  

Prevent Getting Stuck in Soft Ground 

Nobody likes to spend around $400 up to $500 for a tow truck just to pull out a concrete mixer that is stuck. Oftentimes, the ground is very muddy and soft that even the tow truck gets stick. When this situation comes, you will need to hire a unique and a very expensive tow truck to remove everyone from that muddy situation. You would not want to spend more money than you have expected.  

Tall Residential Walls 

Personalized built houses could have tall walls for privacy around the entire property. It could be nearly impossible to put cement into a very narrow wall that is higher than the chute of the truck. On the other hand, a concrete pump truck makes the pour quick and easy. It also minimizes the clutter of cement spilling over the wall forms’ sides.  

No Muddy Mess 

Mixer trucks would pick up plenty of mud and spread it all over the paved roads on adjacent highways and in the subdivision, even if it does not get stuck in the muddy ground. This situation isn’t great for public relations.  

The advantages of concrete pumping service in residential projects usually come from the personal views of a professional, as well as the internet search for the websites of the pumping contractors. If you are not satisfied with the benefits, there are a lot other benefits that aren’t listed in this article. 

Concrete manufacturers should think about associating with several concrete pumping contractors and contacting professional homebuilders to sell the advantages of concrete pumping. This is very true for lots that are hard-to-reach.  

delete

Things to Know about Concrete Pumping 

Concrete pumping in Fresno offers the quickest and the most cost-effective way for putting concrete on construction projects. But, this procedure isn’t without risk and frequently poses a lot of dangers. Of course, there are dos and don’ts of concrete pumping to prevent accidents on the site. 

 Concrete Pumping

Responsibilities of the Contractor 

The key to lowering safety problems at the worksite of concrete pumping is organization. Therefore, the contractor in charge must be accountable for seeing that the correct tools are ordered for the requirements of the project. The contractor must also be accountable for recognizing possible hazards and improving risky conditions to avoid accidents.  

Preparing the Worksite 

Before the pumping stage, site preparation should start first. Make sure to eliminate every mess and clear out few spaces for the pumper. The space has ideally been flattened and is big enough to manage a pump using outriggers that are extended. In addition to that, there must be enough space to manage several mix trucks.  

  • Powerlines 

While pumping concrete, power lines cause the most severe mishaps. All staff must obtain power line and electricity safety training to reduce or avoid these kinds of misfortunes.  

  • Cribbing 

Proper cribbing is important to distribute the balance or weight of the cement load. Pump suppliers usually do manufacture several outrigger pads with the pumping gear. Also, contractors might have an additional supply of wood dunnage or steel plates that could be utilized for extra cribbing when required.  

  • Outriggers 

Bad outrigging process could cause a lot of accidents on construction worksites when pouring concrete, aside from the powerline accidents. Usually, an unrecognized void underground can be the cause of tip overs.  

When it comes to maintaining the steadiness and safety of the outriggers, the type of soil could be a vital factor. Every type of soil could have a various capacity of bearing load. For instance, substituting virgin ground with compact gravel multiplies its support capabilities by more than 2. In several conditions, tip overs happen when outriggers haven’t extended completely.  

Dos of Concrete Pumping 

  • First of all, you must hire certified and trained operators.  
  • When air is entering the system of placement, remove all staff from the area.  
  • Utilize only the boom gear that’s correctly working and has had up-to-date inspections. 
  • Operators must wear always the suitable protective equipment. 
  • Using outrigger pads, properly prepare the ground. 
  • Safety straps must be examined for wear and utilized on the hose tip and attachments that are hanging. 

Don’ts of Concrete Pumping 

  • While the discharged hose is being primed, be sure there are no personnel near it. 
  • Do not set up or operate a concrete pump when it’s night. 
  • Do not handle hoses that are clogged and still under pressure. 
  • Do not stand in front of the cement pipeline’s discharge end.  
  • For the intention of cleaning lines that are clogged, do not climb on hydraulic systems. 
  • When a coupling is pressurized, do not open it. 
  • Do not utilize a boom to replace the job of the crane.